Terminal Monitor - Allied Telesis x310-26FT Command Reference Manual

S C M
YSTEM ONFIGURATION AND

TERMINAL MONITOR

terminal monitor
Overview Use this command to display debugging output on a terminal.
To display the cursor after a line of debugging output, press the Enter key.
Use the command terminal no monitor to stop displaying debugging output on
the terminal, or use the timeout option to stop displaying debugging output on
the terminal after a set time.
terminal monitor [<1-60>]
Syntax
terminal no monitor
Default Disabled
Mode User Exec and Privileged Exec
Examples To display debugging output on a terminal, enter the command:
awplus#
To specify timeout of debugging output after 60 seconds, enter the command:
awplus#
To stop displaying debugging output on the terminal, use the command:
awplus#
Related All debug commands
Commands
C613-50103-01 REV A
C
ONITORING OMMANDS
Parameter Description
<1-60>
Set a timeout between 1 and 60 seconds for terminal output.
terminal monitor
terminal monitor 60
terminal no monitor
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
279