Show Tech-Support - Allied Telesis x310-26FT Command Reference Manual

S C M
YSTEM ONFIGURATION AND
-
SHOW TECH SUPPORT

show tech-support

Overview This command generates system and debugging information for the device and
saves it to a file.
You can optionally limit the command output to display only information for a
given protocol or feature. The features available depend on your device and will be
a subset of the features listed in the table below.
The command generates a large amount of output, which is saved to a file in
compressed format. The output file name can be specified by outfile option. If the
output file already exists, a new file name is generated with the current time stamp.
If the output filename does not end with ".gz", then ".gz" is appended to the
filename. Since output files may be too large for Flash on the device we
recommend saving files to external memory or a TFTP server whenever possible to
avoid device lockup. This method is not likely to be appropriate when running the
working set option of AMF across a range of physically separated devices.
Syntax show tech-support
{[all|atmf|auth|bgp|card|dhcpsn|epsr|firewall|igmp|ip|ipv6|mld
|openflow|ospf|ospf6|pim|rip|ripng|stack|stp|system|tacacs+|
update]} [outfile <filename>]
C613-50103-01 REV A
C
ONITORING OMMANDS
Parameter Description
all
Display full information
atmf
Display ATMF-specific information
auth
Display authentication-related information
bgp
Display BGP-related information
card
Display Chassis Card specific information
dhcpsn
Display DHCP Snooping specific information
epsr
Display EPSR specific information
firewall
Display firewall specific information
igmp
Display IGMP specific information
ip
Display IP specific information
ipv6
Display IPv6 specific information
mld
Display MLD specific information
openflow
Display information related to OpenFlow
ospf
Display OSPF related information
ospf6
Display OSPF6 specific information
pim
Display PIM related information
rip
RIP related information
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
274