Engine Oil Recommendation - TOHATSU EverRun MX 40D3 Owner's Manual

1. Fully open the air vent screw on the
fuel tank cap and release internal
pressure.
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to overflow.
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
4. After filling the tank, close the fuel
tank cap.
ENOM01660-0

3. Engine oil recommendation

ENOW0002A-A
CAUTION
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOW00603-0
Do not mix different brands of oil. Mixing dif-
ferent brands of oil, or different types of oil
1
even if the brand is the same, may cause
gelling, resulting in possible filter screen
blockage. This could result in serious engine
2
damage because of impaired lubrication
performance.
Use a genuine two stroke engine oil or
ones recommended (TC-W3). Refer to
your Distributor.
ENOF00027-B
Use of other two stroke engine oil is not
recommended.
Pre-mixing type
Add engine oil into fuel tank. The mixing
ratio of gasoline and oil is 50:1. Make sure
that gasoline and oil are mixed well. The
mixing ratio during break in is 25:1.
ENOF00030-A
PRE-OPERATING PREPARATIONS
CAUTION
Mixing Ratio
During break-in
After break-in
Fuel by Oil Mixing (25:1, 50:1)
Oil
1.0L
0.5L
0.4L
(10 :0.4)
0.2L
(10 :0.2)
0
2L 10L
Gasoline
Engine Oil : Gasoline
25 : 1
50 : 1
(25:1)
25 : 1
(25:0.5)
50 : 1
25L 30L
ENOF01708-0
27
6