Engine Oil Recommendation - TOHATSU EverRun MX 15E2 Owner's Manual

Table of Contents

Advertisement

24
PRE-OPERATING PREPARATIONS
1. Fully open the air vent screw on the
fuel tank cap and release internal
pressure.
1. Air vent screw
2. Fuel tank cap
6
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to overflow.
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
4. After filling the tank, close the fuel
tank cap.
ENOM01002-0

3. Engine oil recommendation

ENOW0002A-A
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
1
2
ENOF00027-B
ENOF00030-A
CAUTION
Use a genuine two stroke engine oil or
ones recommended (TC-W3). Refer to
your Distributor.
Use of other two stroke engine oil is not
recommended.
Add engine oil into fuel tank. The mixing
ratio of gasoline and oil is 50:1. Make sure
that gasoline and oil are mixed well. The
mixing ratio during break in is 25:1.
Mixing Ratio
During break-in
After break-in
Fuel by Oil Mixing (25:1, 50:1)
Oil
1.0L
0.5L
0.4L
(10 : 0.4)
0.2L
(10 : 0.2)
0
2L
10L
Gasoline
ENOM01003-0
Engine oil – gasoline mixing
procedure
ENOW00937-1
CAUTION
Do not use other than two stroke engine
oil with specified grade, or the engine
may be damaged.
Do not use fuel prepared in other than
specified mixing ratio.
- Lack of engine oil can cause severe engine
problems such as piston seizure.
- Excess of engine oil can shorten spark
plug life, and/or cause increase of noxious
exhaust.
Gasoline : Engine Oil
25 : 1
50 : 1
(25:1)
25 : 1
(25:0.5)
50 : 1
25L
30L
ENOF01708-0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everrun mx 18e2

Table of Contents