Shallow Water Operation - TOHATSU EverRun MX 15E2 Owner's Manual

38
ENGINE OPERATION
3
1. Reverse lock lever
2. Tilt up position
3. Tilt down position
7
ENOM00063-1
Tilt down
Pull the reverse lock lever upward until it
comes to a stop (This is the tilt down
position), lift up the outboard motor to
free it from the reverse lock, then release
to lower the outboard motor.
3
1
2
ENOF01725-0
ENOF01726-0
1
2
ENOF01725-0
1. Reverse lock lever
2. Tilt up position
3. Tilt down position
ENOM00068-A

9. Shallow water operation

ENOW00051-0
WARNING
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
CAUTION
While in shallow water drive position, do not
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-1
CAUTION
Do not over tilt the outboard motor when
driving in shallow water, or air may be sucked
through water inlet and sub-water inlet,
potentially leading to engine overheating.
2
1. Water inlet
2. Sub-water inlet
1
ENOF01144-0