40
ENGINE OPERATION
cowl. Then slightly lower the motor for
locking in the up position.
1
7
3
1. Tilt up position
2. Tilt stopper
3. Shallow water running position
ENOM00424-0
Tilt down
Slightly tilt the motor up, and pull the tilt
lever toward you to release the tilt-lock.
Then lower the motor slowly.
ENOF00441-1
1. Tilt lever
2. Tilt stopper
ENOM00068-A
9. Shallow water operation
ENOW00051-0
2
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOF00442-0
ENOW00053-0
While in shallow water drive position, do not
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-1A
Do not over tilt the outboard motor when
driving in shallow water, or air may be sucked
through water inlet, potentially leading to
engine overheating.
1
2
ENOF00443-0
WARNING
CAUTION
CAUTION