Renault Laguna III Manual page 3000

Rear bumper wiring: Removal - Refitting
B91 or K91, and REAR PROXIMITY RADAR
a Disconnect the connectors (3) from the proximity
sensors.
WIRING HARNESS
125676
88A-94
a Unclip the rear bumper wiring at (4) .
WARNING
To prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).
a Remove the rear bumper wiring.
REFITTING
I - REFITTING PREPARATION OPERATION
a If replacing with more wiring, lock the unused con-
nectors (see Connector: Sealing and immobilisa-
tion) (Technical Note 6015A, 88A, Wiring).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the rear bumper wiring.
a Clip the wiring onto the rear bumper.
B91 or K91, and REAR PROXIMITY RADAR
a Connect the proximity radar connectors.
88A
125677