Renault Laguna III Manual page 2997

Rear wiring: Removal - Refitting
K91
a Unclip the wiring at (5) .
a Disconnect the R 401 connectors on the boot lid/
heated rear screen wiring connection (6) .
WARNING
T o prevent any damage during the removal oper-
ation, check that the wiring is free from its mount-
ings (retaining clip, plastic clip, adhesive tape,
connector, etc.).
a Remove the rear wiring from the vehicle.
WIRING HARNESS
125679
125641
88A-91
REFITTING
I - REFITTING PREPARATION OPERATION
a If replacing with more wiring, lock the unused con-
nectors (see Connector: Sealing and immobilisa-
tion) (Technical Note 6015A, 88A, Wiring).
II - REFITTING OPERATION FOR PART
CONCERNED
a Position the rear wiring.
a Clip on the rear wiring.
a Attach the rear wiring.
a Connect:
- the R 401 connectors on the boot lid/heated rear
screen wiring connection,
- the R 621 connector on the left tailgate/left tailgate
intermediate connection,
- the rear screen wiper motor connector,
- the R 244 connector on the boot lid/left rear con-
nection.
III - FINAL OPERATION.
a Refit:
- the rear left-hand quarter panel trim (see Quarter
panel trim: Removal - Refitting) (71A, Body inter-
nal trim).
- the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (73A, Non-side opening elements trim),
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-4) .
88A