Electronic Engine Controls - Camshaft
Position (CMP) Sensor—1.8L Duratorq-
TDCi (Lynx) Diesel
Removal and Installation
1. Remove the components in the order indicated in the following illustration(s) and table
(s).
Item
Part Number
1
-
2
-
3
-
2. To install, reverse the removal procedure.
Installation Details
Item 3 : CMP sensor
CAUTION: Make sure that the CMP sensor locating hole is free from foreign matter,
before installing the CMP sensor. Failure to follow this instruction may result in incorrect
installation of the CMP sensor and will not allow the engine to run.
Description
CMP sensor electrical connector
CMP sensor retaining bolt
CMP sensor
See Installation Detail
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Print