ZH
2. Press the release button (3) and install the reverse
lockout cable (1) in the bracket. Tighten the lock
nut (2).
3. Install the propeller shaft. (Refer to 3 - DIFFERENTIAL & DRIVELINE/PROPELLER SHAFT - INSTALLATION).
4. Lower the vehicle.
5. Install the boot (3), the cover (4), the spring (5) and
washer (6) on the shift mechanism.
6. Press down on the washer (6) and install the
retaining pin (2).
7. Install the gear shift lever handle (1). (Refer to 21 - TRANSMISSION/TRANSAXLE/MANUAL/GEAR SHIFT
KNOB - INSTALLATION).
8. Connect the negative battery cable.
MANUAL - SERVICE INFORMATION 21 - 415