Chrysler 2005 Crossfire SRT6 Service Manual page 3780

23 - 232 DECKLID/LIFTGATE
7. Have a helper hold the liftgate and remove the two
bolts (2) from each hinge under the roof of the
vehicle, leaving the hinge bolts (1) attached to the
liftgate.
8. Carefully lift the liftgate off the body and then set it
down on a clean dry surface.
INSTALLATION
1. Have a helper lift the liftgate and install the two
bolts (1) for each hinge from inside the roof panel.
Tighten to 25 N·m (18 ft. lbs.).
ZH