Chrysler 2005 Crossfire SRT6 Service Manual page 3386

21 - 316 AUTOMATIC - NAG1 SERVICE INFORMATION ZH
HOLDING CLUTCH B1
DISASSEMBLY
1. Remove the snap-ring (7).
2. Remove the multiple-disc pack (6) and the disc spring (5) from the multi-disc holding clutch B1 outer carrier.
3. Place Special Tool 8900 on the disc spring and compress the spring until the snap-ring (4) is exposed.
4. Remove the snap-ring (4).
5. Remove the piston (2) from the multi-disc holding clutch B1 carrier by carefully blowing compressed air into the
bore.