Chrysler 2005 Crossfire SRT6 Service Manual page 3899

23 - 338 HOOD
LATCH RELEASE CABLE
REMOVAL
1. Open the hood and move it to the upright position.
2. Remove the screw on the pull handle (1).
3. Pull the handle (1) out of the arresting mechanism
in the cover and then remove the hood pull cable
from the handle (1).
4. Remove the cable grommet from the bulkhead just
below the fuse box.
5. Remove the upper frame cross member.
6. Remove the clip on the frame cross member.
7. Remove the cover.
8. Remove the hood latch (6).
9. Remove the hood latch release cable (1) from
between the headlamp and the upper frame cross
member.
ZH