Chrysler 2005 Crossfire SRT6 Service Manual page 3252

21 - 182 NAG1 - ELECTRICAL DIAGNOSTICS
CAN BUS CIRCUIT (CONTINUED)
CAN COMMUNICATION FAILURE
CAN C BUS (+) AND/OR CAN C BUS (-) CIRCUIT OPEN
SHIFT LEVER ASSEMBLY
For a complete Shift Lever Assembly Circuit Diagram, (Refer to 21 - TRANSMISSION/TRANSAXLE/AUTOMATIC -
NAG1 - SCHEMATICS AND DIAGRAMS).
Diagnostic Test
1.
CHECK FOR CAN DTCS IN OTHER MODULES
Turn the ignition on.
With the DRB III , read the stored and active DTCs for all modules on
the CAN C BUS.
Are other modules reporting CAN BUS DTCs?
Yes >> Refer to the reporting category and perform the appropri-
ate symptom. If the PCM is reporting a CAN BUS failure,
refer to the PCM tests first.
No >> Go To 2
POSSIBLE CAUSES
ZH