21 - 232
AUTOMATIC - NAG1 SERVICE INFORMATION
Note: The intermediate plate can generally be used several times. The plate must not be coated with sealant
6. Check that the driving clutch K1 feed hole (1) in
the inner hub of multi-disc holding clutch B1 is free
before installing multi-disc holding clutch B1.
7. Install the multi-disc holding clutch B1 (5) onto the converter housing (2) and intermediate plate (3). Installed
position of clutch B1 (5) in relation to converter housing (2) is specified by a plain dowel pin (arrow) in clutch B1
(5).
8. Install the bolts to multi-disc holding clutch B1 (5) to the converter housing (2).
ZH