Chrysler 2005 Crossfire SRT6 Service Manual page 3448

21 - 378 MANUAL - SERVICE INFORMATION
7. Remove the output shaft collared nut (5) and the
output flange (6).
8. Drive out the roll pin (8) with a suitable roll pin
punch and remove the shift actuator (7).
9. Remove the reverse gear detent plug (1). (Refer to
21 - TRANSMISSION/TRANSAXLE/MANUAL/DE-
TENT PLUG - REMOVAL).
10. Remove the rear section retaining bolts (4).
11. Separate the rear section from the front section.
Note: The countershaft, input shaft, and shift unit
can only be removed as an assembly from the rear
section.
12. Remove the four bolts(1) attaching the shifter
plate (2) to the rear section.
13. Use special tools 1126 and 938 to press the
shafts and shift unit out of the rear section of the
transmission.
ZH