Chrysler 2005 Crossfire SRT6 Service Manual page 3299

ZH
26. Unscrew the bolts (4) and remove the oil pump (6). Screw two opposed bolts into the oil pump housing and
press the oil pump out of the converter housing by applying light blows with a plastic hammer.
27. Remove and discard the torque converter hub seal and the oil pump outer o-ring seal from the oil pump.
28. Unscrew the bolts (1) and remove the multi-disc brake B1 (5) from the torque converter housing. Screw two
opposed bolts into the multi-disc brake B1 (5) and separate from the torque converter housing by applying light
blows with a plastic hammer.
29. Detach the intermediate plate (3) from torque converter housing (2).
AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 229