19 - 62
LINKAGE
3. Remove the nuts attaching the tie rod ends to the
steering knuckles.
4. Using Special Tool C-3894-A (2) Two Jaw Puller
remove the tie rod ends (1) from the steering
knuckles.
5. Using Special Tool 9168 (2) Ball Joint Puller
remove the drag link (1) from the pitman arm and
the idler arm.
Note: The right-hand drag link joint is a pivot joint
with a swivelling range of max. 2°. This prevents
the drag link from tilting.
6. Inspect the tie rod ends for play or damage. Repair
as necessary.
ZH