21 - 298
AUTOMATIC - NAG1 SERVICE INFORMATION
Note: A total of 12 valve balls are located in the
valve body, four made from plastic (4) and eight
from steel (1, 3).
15. Note the location of all check balls (1, 3, 4) and
the central strainer (2) for re-installation. Remove
all check balls (1, 3, 4) and the central strainer
(2).
16. Remove the screws holding the side covers to the
valve body and valve housing.
17. Remove all the valves and springs from the valve body (1). Check all valves for ease of movement and
shavings.
ZH