Chrysler 2005 Crossfire SRT6 Service Manual page 3273

AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 203
ZH
Center Planetary Gear Set
The annulus gear (10) is driven at the same speed as the rear planetary carrier (15) as a result of a mechanical
connection. The sun gear (22) is held against the housing by the multi-disc holding clutch B2 (6). The planetary
pinion gears (18) turn on the fixed sun gear (22) and increase the torque from the annulus gear (10) to the plan-
etary carrier. The output shaft (26) connected to the center planetary carrier (14) turns at a reduced speed in the
running direction of the engine.
Rear Planetary Gear Set
The annulus gear (11) turns at a reduced speed due to the mechanical connection to the front planetary carrier (15).
The sun gear (23) is held against the housing by the engaged multi-disc holding clutch B2 (6), by the locked free-
wheel F2 (24) during acceleration and by the engaged driving clutch K3 (12) during deceleration. The rear planetary
gears (19) turn on the fixed sun gear (23) and increase the torque from the annulus gear (11) to the planetary
carrier (15). The planetary carrier (15) moves at a reduced speed in the running direction of the engine.
SECOND GEAR POWERFLOW
Torque from the torque converter is increased via the driveshaft (25) and the center and rear planetary gearset and
transferred to the output shaft (26).