ZH
3. Press down on the retainer spring (5) and remove
the lock pin (2) from the shift lever (1). Remove the
shift lever (1), the washer (6) and spring (5), the
cover (4) and the boot (3) from the shift
mechanism.
4. Remove the propeller shaft. (Refer to 21 - TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL).
5. Lower the engine and transmission slightly with the support.
6. Loosen the cable lock nut (2) and press In on the
release button (3) to remove the reverse lockout
cable (1) from the bracket.
MANUAL - SERVICE INFORMATION 21 - 413