ZH
(P0715) N3 INPUT SPEED SENSOR CIRCUIT (CONTINUED)
8.
SENSOR GROUND CIRCUIT SHORT TO OTHER CIRCUITS
With the ignition off.
Measure the resistance from the Sensor Ground circuit to all other cir-
cuits in the Transmission Solenoid harness connector.
Is the resistance above 100 kohms for all measurements?
Yes
>> Go To 9
No
>> Repair the Sensor Ground circuit for a short to other cir-
cuits.
Perform NAG1 TRANSMISSION VERIFICATION TEST.
9.
SENSOR GROUND CIRCUIT SHORT TO GROUND
With the ignition off.
Measure the resistance between ground and the Sensor Ground cir-
cuit.
Is the resistance above 100 kohms?
Yes
>> Go To 10
No
>> Repair the Sensor Ground circuit for a short to ground.
Perform NAG1 TRANSMISSION VERIFICATION TEST.
NAG1 - ELECTRICAL DIAGNOSTICS 21 - 111