Chrysler 2005 Crossfire SRT6 Service Manual page 3907

23 - 346 INSTRUMENT PANEL
INSTALLATION
INSTALLATION - GLOVE COMPARTMENT
Note: When installing the air duct, check the clips
and exposed electrical connections for the glove
compartment illumination and route through the
opening.
1. Install glove compartment.
2. Install the screws (1, 2, 4 and 5) around the
opening.
3. Connect the glove compartment lamp electrical
connector and install.
4. Install the cover (2) at the top of the glove compart-
ment opening.
ZH