ZH
8. Lower the window until the mounting screws (2-4)
are accessible through the assembly openings in
the door.
9. Disconnect the connector for the power window
motor (3).
Note: The slider is fastened to the window and
cannot be removed.
10. Loosen the mounting bolt only until the window
(5) can be lifted out of the slider.
11. Remove the window by pulling it upward while
guiding the slider through the opening in the door
shaft.
12. Put the window down on a secure and dry
surface.
INSTALLATION
WARNING: WHEN WORKING ON THE POWER WINDOWS OR THE WINDOWS IN THE VEHICLE DOORS, THE
UNSECURED WINDOW CAN FALL DOWN AND CAN CAUSE INJURY BY PINCHING HANDS.
DOOR 23 - 285