Chrysler 2005 Crossfire SRT6 Service Manual page 3940

ZH
2. Position the A-pillar (1) flush on top of the section
of the instrument panel and press it into the retain-
ing clips.
3. Lift the rubber lip on the A-pillar seal over the A-pil-
lar trim with a plastic wedge.
CARPET
REMOVAL
REMOVAL - CARPET (LEFT SIDE)
1. Remove the front seat. (Refer to 23 - BODY/
SEATS/SEAT - REMOVAL).
2. Remove the rear center console. (Refer to 23 -
BODY/INTERIOR/CENTER
REMOVAL).
3. Remove the cover on center console. (Refer to 23
- BODY/INTERIOR/CENTER
REMOVAL).
4. Remove the ashtray housing with the stowage
compartment in the front of the center console.
(Refer to 23 - BODY/INTERIOR/CENTER CON-
SOLE - REMOVAL).
5. Remove the air outlet cover in the footwell.
6. Remove the door sill trim plate (4). (Refer to 23 -
BODY/INTERIOR/DOOR SILL TRIM PLATE -
REMOVAL).
7. Remove the kick panel (2) in the left footwell by
pulling the edge guard (1) off in the area of the kick
panel (2). Remove the cap (3) with a small screwdriver, then remove the screw.
8. Remove the pedal cover.
CONSOLE -
CONSOLE -
INTERIOR 23 - 379