Chrysler 2005 Crossfire SRT6 Service Manual page 3052

19 - 52 LINKAGE
ZH
INSTALLATION - RHD
1. Install the idler arm bushing (1) to the idler arm.
2. Adjust the idler arm bushing (1) to the reference dimension.
3. Install the idler arm pinch bolt. Tighten to 30 N·m (22 ft. lbs.).
4. Install the idler arm (2) to the vehicle.
5. Install the nut and bolt (1) on the idler arm. Tighten to 50 N·m (37 ft. lbs.).
6. Install the heat shield (4).
7. Install the drag link (3) to the idler arm (2). Tighten to 50 N·m (37 ft. lbs.).