Chrysler 2005 Crossfire SRT6 Service Manual page 3058

19 - 58 LINKAGE
4. Install the pitman arm to the previously measured
depth of measurement A . Tighten the pinch bolt
to 55 N·m (41 ft. lbs.).
INSTALLATION - RHD
1. Remove any oil and grease from the splined sec-
tion of the pitman arm shaft (2) and the pitman arm
(1).
2. Install the pitman arm (1) to the pitman arm shaft
(2).
3. Install the snap ring to the pitman arm shaft (2).
ZH