Chrysler 2005 Crossfire SRT6 Service Manual page 2997

ZH
REMOVAL - SRT
1. Disconnect the negative battery cable.
2. Remove the throttle body inlet tube (1) by removing
the upper air cleaner housing and tubes (2), then
lifting up on the inlet tube lever (3) and removing
the inlet tube from the throttle body.
3. Disconnect the throttle body harness connector (1).
4. Disconnect the PCV hose (3) from the throttle
body.
5. Remove the throttle body retaining bolts (2) and
PCV hose bracket.
6. Remove the throttle body and the throttle body
gasket from engine.
FUEL INJECTION 14 - 59