Chrysler 2005 Crossfire SRT6 Service Manual page 3484

21 - 414 MANUAL - SERVICE INFORMATION
7. Remove the shift rod (2) from the ball stud.
Remove the retaining pin (1) from the shift mecha-
nism.
8. Lower and remove the shift mechanism (3) from
the vehicle.
INSTALLATION
Note: Be sure that the foam insulation remains in
position around the opening in the floor pan.
1. Position the shift mechanism (3) in the vehicle
above the transmission and install the retaining pin
(1). Connect the shift rod (2) to the ball stud.
ZH