ZH
AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 351
ADJUSTMENTS - SHIFT INTERLOCK SOLENOID
1. Set the parking brake.
2. Remove the front center console. (Refer to 23 - BODY/INTERIOR/CENTER CONSOLE - REMOVAL).
3. Remove the shifter outer cover.
4. Set the selector lever to nuetral. Lever must be touching the slot (arrow).
5. Energize the interlock solenoid (3).
6. Loosen the bolts (1).
7. Adjust the gap between the locking lever (4) and the cam plate (5) to .02 mm using the adjusting screw (2).
8. Tighten the bolts (1) to 3.5 N·m (31 in. lbs.).
9. Install the shifter outer cover.
10. Install the console. (Refer to 23 - BODY/INTERIOR/CENTER CONSOLE - INSTALLATION).