Chrysler 2005 Crossfire SRT6 Service Manual page 3849

ZH
INSTALLATION
1. Connect the door lock cable to the plastic retainer
clip located on the back side of the inside of the
trim panel.
2. Connect the front door speaker electrical connec-
tor.
3. Install the door trim panel (1) by tilting it outwards
and clipping the upper door panel clips. Then swing
the door trim panel down and push in the clips on
the bottom of the door panel.
4. Install the door trim panel retaining screws (2).
5. Install the screw behind the SRS cover (3) and
then install the cover.
6. Install the door end cover (1) and the door latch
cover (2).
7. Install the escutcheon cover.
8. Install the pull handle cover.
9. Install the release handle bezel.
2005 ZH Service Manual Publication No. 81-270-05036
DOOR 23 - 300A
05ZH23-300A October, 2004