Chrysler 2005 Crossfire SRT6 Service Manual page 3920

ZH
REMOVAL - LOWER INSTRUMENT PANEL (RIGHT)
1. Fold back the carpet (3).
2. Remove the screws (2) attaching the lower instru-
ment panel to the glove compartment.
3. Pull the lower instrument panel (1) out.
REMOVAL - LOWER I/P PANEL RIGHT - RHD
1. Remove the right side I/P air outlet deflector (1) by
pulling it out of the I/P.
2. Remove the screw (5) attaching the steering col-
umn panel under the steering column, then remove
the steering column panel.
3. Remove the fuse panel side cover.
4. Remove the two screws (4) attaching the lower I/P
to the illumination control module and the screw (3)
on the side of the I/P to the illumination control
module support bar.
5. Disconnect the illumination control module harness
connector, then remove the illumination control
module from the I/P.
6. Remove the screw (2) attaching the lower I/P panel
to the cluster cover.
INSTRUMENT PANEL 23 - 359