Chrysler 2005 Crossfire SRT6 Service Manual page 3370

21 - 300 AUTOMATIC - NAG1 SERVICE INFORMATION
1. Install all of the valves and springs from the valve body (1). Check all valves for ease of movement and
shavings.
Note: Pay great attention to cleanliness for all
work on the shift plate. Fluffy cloths must not be
used. Leather cloths are particularly good. After
dismantling, all parts must be washed and blown
out with compressed-air, noting that parts may be
blown away.
2. Install the pressure supply valve (1) into the valve
body.
Note: The sleeves and pistons of the overlap regulating valves must not be mixed up.
3. Install all of the valves and springs into the valve housing (2). Check all valves for ease of movement and shav-
ings.
4. Install the screws to hold the side covers to the valve body and valve housing. Tighten the screws to 4 N·m (35
in. lbs.).
ZH