ZH
8. Remove the screw (4) located behind the left air
outlet deflector by removing the deflector to reveal
the screw.
9. Open the glove compartment and remove the
screws (1) attaching it the top section of the I/P.
10. Remove the defroster grille screws (1) and the
defroster grille pulling it outwards.
11. Remove the bolts on left and right under the
defroster grille.
CAUTION: Damage to the top section of I/P can
occur if the A-pillar sheet metal clips were not
removed.
12. Lift the top section of the I/P and remove toward
rear.
13. Lay the top section of I/P down on a suitable
surface.
INSTRUMENT PANEL 23 - 355