Chrysler 2005 Crossfire SRT6 Service Manual page 3049

LINKAGE 19 - 49
ZH
IDLER ARM
REMOVAL
REMOVAL
1. Remove drag link (3) from the idler arm (4) by removing the idler arm nut.
2. Remove the heat shield (2).
3. Remove the nut and bolt and remove the idler arm (4) from the vehicle.
4. Loosen the pinch-bolt on the idler arm (4).
5. Remove the idler arm bushing from the idler arm (4).
6. Inspect the idler arm bushing. Replace as necessary.