Chrysler 2005 Crossfire SRT6 Service Manual page 3479

ZH
Note: Ensure the adjustment tool is properly
placed at the front and the rear of the shifter hous-
ing.
7. Lift up on the shifter knob and move the shifter to
the full left position. Place the Special Tool 9120 (1)
onto the shifter alignment slot at the base of the
shifter housing (2).Ensure that the recessed portion
of the tool is facing upward.
8. Raise and support the vehicle.
9. Depress the detent lock (1) on the reverse lock-out
cable. The cable should automatically adjust when
the lock is depressed.
10. The adjustment procedure is now complete.
MANUAL - SERVICE INFORMATION 21 - 409