Chrysler 2005 Crossfire SRT6 Service Manual page 3443

ZH
DETENT PLUG
REMOVAL
1. Remove the transmission. (Refer to 21 - TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL).
2. Use Special Tool C–3752 Slide Hammer and 8870
Adaptor to remove the detent plug (1).
INSTALLATION
1. Smooth any burrs or nicks in the detent plug bore.
2. Use a plastic mallet to drive in and fully seat the
detent plug (1).
3. Install the transmission in the vehicle. (Refer to 21
- TRANSMISSION/TRANSAXLE/MANUAL
INSTALLATION).
MANUAL - SERVICE INFORMATION 21 - 373
-