ZH
(P0763) 3-4 SOLENOID CIRCUIT (CONTINUED)
7.
INTERMITTENT WIRING AND CONNECTORS
The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible
intermittent condition.
Using the schematics as a guide, inspect the wiring and connectors specific to this circuit.
Wiggle the wires while checking for shorts and open circuits.
Note: Check for any Technical Service Bulletins that may apply.
Were any problems found?
Yes
>> Repair as necessary.
Perform NAG1 TRANSMISSION VERIFICATION TEST.
No
>> Test Complete.
NAG1 - ELECTRICAL DIAGNOSTICS 21 - 157