Chrysler 2005 Crossfire SRT6 Service Manual page 3375

ZH
10. Position the heat shield (2) onto the transmission
housing and install the screw (1) and bolt (3) to
hold the shield in place.
11. Fill the transmission with specified fluid. (Refer to
21 - TRANSMISSION/TRANSAXLE/AUTOMATIC -
NAG1/FLUID - STANDARD PROCEDURE).
FLUID AND FILTER
DESCRIPTION
Use ATF approved to MB 236.10, MB 236.12, such as
Mopar part number 05127382AA. Synthetic Dexron
III Automatic Transmission Fluid may be substituted.
The oil level control is located on the electrohydraulic
unit and consists of the float (5) which is integrated
into the electrohydraulic control unit. The float is posi-
tioned to plug the opening between the oil gallery and
gearset chamber so that the rotating gearsets do not
splash about in oil as the oil level rises. The oil level
control reduces power loss and prevents oil from
being thrown out of the transmission housing at high
oil temperatures.
AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 305