Chrysler 2005 Crossfire SRT6 Service Manual page 3013

ZH
REMOVAL - RHD
WARNING: BEFORE SERVICING THE STEERING COLUMN THE AIRBAG SYSTEM MUST BE DISARMED.
FAILURE TO DO SO MAY RESULT IN ACCIDENTAL DEPLOYMENT OF THE AIRBAG AND POSSIBLE PER-
SONAL INJURY.
1. Disconnect the negative battery cable.
2. Remove the right lower I/P panel from under the
steering column. (Refer to 23 - BODY/INSTRU-
MENT PANEL/INSTRUMENT PANEL ASSEMBLY -
REMOVAL).
3. Remove the driver airbag. (Refer to 8 - ELECTRI-
CAL/RESTRAINTS/DRIVER AIRBAG - REMOVAL).
4. Position the front wheels in the straight-ahead posi-
tion.
5. Remove the steering wheel bolt (1) and remove the
steering wheel. (Refer to 19 - STEERING/COL-
UMN/STEERING WHEEL - REMOVAL).
COLUMN 19 - 13