Chrysler 2005 Crossfire SRT6 Service Manual page 2998

14 - 60 FUEL INJECTION
INSTALLATION
INSTALLATION
1. Connect the PCV hose (1) to the throttle body (5).
2. Install the throttle body (5) and gasket to engine.
3. Install the PCV hose bracket and throttle body
retaining bolts. Tighten to 20 N·m (15 ft. lbs.).
4. Connect the throttle body harness connector (3).
5. Install the throttle body inlet tube.
6. Install the engine cover. Align the engine cover
retaining clips to the rubber mounts, and push
down firmly to connect engine cover to rubber
mounts.
Note: To ease the installation of the engine cover,
apply a small amount of lubricant to the engine
cover rubber mounts.
7. Connect the negative battery cable.
INSTALLATION - SRT
1. Connect the PCV hose (3) to the throttle body.
2. Install the throttle body and gasket to engine.
3. Install the throttle body retaining bolts (2) and the
PCV hose bracket. Tighten to 20 N·m (15 ft. lbs.).
4. Connect the throttle body harness connector (1).
ZH