Chrysler 2005 Crossfire SRT6 Service Manual page 3044

19 - 44 GEAR
6. Install the pinch bolt (1) to the steering coupling.
Tighten to 16-20 N·m (11-15 ft. lbs.).
7. Install the high-pressure hose (2). Tighten to 30
N·m (22 ft. lbs.).
8. Install the return line (3). Tighten to 40 N·m (30 ft.
lbs.).
9. Install the drag link/tie rod. (Refer to 19 - STEER-
ING/LINKAGE/DRAG LINK - INSTALLATION).
10. Install the right front cross brace.
11. Fill and bleed the power steering pump. (Refer to
19 - STEERING/PUMP
PROCEDURE).
- STANDARD
ZH