Chrysler 2005 Crossfire SRT6 Service Manual page 3042

19 - 42 GEAR
4. Lower the engine and tighten the engine mounts
(1). Tighten to 25 N·m (18 ft. lbs.).
5. Install the ground strap to the frame.
6. Install the pinch bolt (1) to the steering coupling.
Tighten to 16-20 N·m (11-15 ft. lbs.).
7. Install the high-pressure hose (2). Tighten to 30
N·m (22 ft. lbs.).
8. Install the return line (3). Tighten to 40 N·m (30 ft.
lbs.).
9. Install the drag link/tie rod. (Refer to 19 - STEER-
ING/LINKAGE/DRAG LINK - INSTALLATION).
10. Install the left front cross brace.
11. Fill and bleed the power steering pump. (Refer to
19 - STEERING/PUMP
PROCEDURE).
- STANDARD
ZH