21 - 382
MANUAL - SERVICE INFORMATION
12. Fit the front and rear transmission sections
together.
13. Install the bolts (4) and tighten to 28 N·m (21 ft.
lbs.).
14. Install the shift actuator (7) and drive the roll pin
(8) in until flush.
15. Drive the reverse gear detent (1) in until fully
seated.
16. Install the oil filler plug (2). Tighten the plug to 50
N·m (37 ft. lbs.).
17. Install the oil drain plug (3). Tighten the plug to 60
N·m (44 ft. lbs.).
18. Install the output flange (6) and collared nut (5).
Tighten the nut to 180 N·m (133 ft. lbs.).
ZH