23 - 34
CONVERTIBLE TOP
9004 POWER TOP CONTROL MODULE (PTCM) EEPROM TIMING (CONTINUED)
1.
DTC Present in the Power Top Control Module (PTCM)
Note: This is an informational DTC reporting that the Power Top
Control Module has indicated an internal EEPROM timing glitch.
This DTC does not indicate a fatal error in the PTCM and should
not be replaced. The Power Top will work as designed with the
DTC set.
With the DRBIII , read and record the PTCM DTCs and then erase
the PTCM DTCs
Perform 3 ignition key cycles, leaving the ignition key on for a mini-
mum of 90 seconds per cycle.
Erase this DTC from the PTCM after any other PTCM DTC(s) have
been repaired.
PTCM Diagnostic Information complete.
Continue
Test Complete.
ZH