Chrysler 2005 Crossfire SRT6 Service Manual page 3661

ZH
9721 LEFT ROTATION RELAY CONTROL CIRCUIT OPEN/SHORT TO B(+) (CONTINUED)
5.
Open Rotation Relay Ground circuit
With the ignition off.
Measure the resistance of the Rotation Relay Ground circuit from the
Left Rotation Relay harness connector to the PTCM C2 harness con-
nector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Left Rotation Relay.
Perform POWER TOP CONTROL MODULE VERIFICA-
TION TEST.
No >> Repair the Rotation Relay Ground circuit for an open.
Perform POWER TOP CONTROL MODULE VERIFICA-
TION TEST.
6.
Rotation Relay Ground Circuit
Turn the ignition off.
Disconnect the Power Top Control Module C2 harness connector.
Measure the resistance between the Rotation Relay Ground circuit
and the Left Rotation Relay Control circuit at the Power Top Control
Module C2 harness connector.
Is the resistance between 60.0 - 90.0 ohms?
Yes >> Replace the Power Top Control Module.(Refer to 8 -
ELECTRICAL/ELECTRONIC
POWER TOP CONTROL MODULE - REMOVAL).
Perform POWER TOP CONTROL MODULE VERIFICA-
TION TEST.
No >> Repair the Rotation Relay Ground circuit for an open.
Perform POWER TOP CONTROL MODULE VERIFICA-
TION TEST.
CONTROL MODULES/
CONVERTIBLE TOP 23 - 113