Chrysler 2005 Crossfire SRT6 Service Manual page 3113

ZH
(P0600) ENGINE CAN MESSAGE INCORRECT (CONTINUED)
3.
PCM - ENGINE CAN MESSAGE INCORRECT
Turn the ignition off.
Replace and program the Powertrain Control Module. (Refer to 8 -
ELECTRICAL/ELECTRONIC
CONTROL MODULE - REMOVAL).
Turn the ignition on.
With the DRB III , erase Transmission DTCs.
Start the engine.
With the brakes firmly applied, shift the gear selector into drive.
With the DRB III , read Transmission DTCs.
Did DTC (P0600) ENGINE CAN MESSAGE INCORRECT set
again?
Yes >> Replace the Transmission Control Module. (Refer to 8 -
ELECTRICAL/ELECTRONIC
REMOVAL).
Perform NAG1 TRANSMISSION VERIFICATION TEST.
No >> Test Complete.
CONTROL MODULES/POWERTRAIN
CONTROL
NAG1 - ELECTRICAL DIAGNOSTICS 21 - 43
MODULES/TRANSMISSION CONTROL MODULE -