Chrysler 2005 Crossfire SRT6 Service Manual page 3944

ZH
REMOVAL - CARPET (RIGHT SIDE)
1. Remove the front seat. (Refer to 23 - BODY/
SEATS/SEAT - REMOVAL).
2. Remove the rear center console. (Refer to 23 -
BODY/INTERIOR/CENTER
REMOVAL).
3. Remove the cover on the center console. (Refer to
23 - BODY/INTERIOR/CENTER
REMOVAL).
4. Remove the ashtray housing with the stowage
compartment in the front center console. (Refer to
23 - BODY/INTERIOR/CENTER
REMOVAL).
5. Remove the air outlet cover in the footwell.
6. Remove lower instrument panel (right). (Refer to 23
- BODY/INSTRUMENT
PANEL ASSEMBLY - REMOVAL).
7. Removing the door sill trim plate (4). (Refer to 23 -
BODY/INTERIOR/DOOR SILL TRIM PLATE -
REMOVAL.)
8. Remove the kick panel (2) in the right footwell. Pull the edge guard (1) off in the area of the kick panel (2).
Remove the cap (3) with a suitable tool, then remove the screw.
9. Unhook the storage pocket and remove it from the
vehicle.
10. Disconnect the connector from the parking brake
switch (1).
11. Remove the plugs and pull off the edge protector
at the rear in the lower area.
CONSOLE -
CONSOLE -
CONSOLE -
PANEL/INSTRUMENT
INTERIOR 23 - 383