Chrysler 2005 Crossfire SRT6 Service Manual page 3355

AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 285
ZH
Command Valve
Each shift group possesses one command valve (3). The 1-2 / 4-5 and 2-3 command valves are installed in the shift
valve housing; the 3-4 command valve is installed in the valve housing. The command valve switches the shift
group from the stationary phase to the shift phase and back again.
Holding Pressure Shift Valve
Each shift group possesses one holding pressure shift valve (1). The 1-2 / 4-5 and 2-3 holding pressure shift valves
are installed in the shift valve housing; the 3-4 holding pressure shift valve is installed in the valve housing. The
holding pressure shift valve allocates the working pressure to one actuator of a shift group.