Chrysler 2005 Crossfire SRT6 Service Manual page 3015

ZH
12. Feed the clockspring harness connectors down
through the column removing them from the col-
umn.
13. Remove the pinch bolt (1) attaching the steering
column to the steering gear.
14. Remove the lower nuts on the steering column
attaching the steering column to the lower mount-
ing surface.
15. Remove the upper bolts (1) on the steering col-
umn attaching it to the instrument panel support.
CAUTION: DO NOT use force as the intermediate
shaft is sensitive to the effects of side force.
16. Pull the steering column out away from the instru-
ment panel.
COLUMN 19 - 15